Mutability
property:
perpetual
motion and energy.
The mechanism’s components:
|
|
|
Front prospective |
Cross section
|
Magnetized cross section |
||||||||||
|
Two rings: zinc Metal: paramagnetic, not magnetic Two, circular having perfect elliptical body,
must not carry angles. |
|
|
|
|
||||||||||
|
* Magnetized sphercone: Iron/zinc.
half sphere and a cone, must not carry angles: the cone has to be generated on top of the
sphere |
|
|
|
|
||||||||||
|
* Magnetized ring: Iron/zinc. circular with a circular body. |
|
|
|
|
||||||||||
|
Assembling structure: |
|
|
|
|||||||||||
|
Wood structure: made of five segments fitting into each other. Can’t be used glue. Wiring: Outside wiring. Light bulb: 1 watt. Has to be placed on the border of the top segment, not its center. Has to be used as little material: wood and wiring, as possible. |
|
|
|
|
Distances: (mm)
|
Magnetization: |
|
|
|
·
Inside the ore element Hematite, Iron has to
be the element with the higher PRV (pressurizing value). The process of purification has to leave in it
the elements with lower PRV (Oxygen and other if present). Their % has to generate magnetization with retentivity as in the given measures. ·
Corrosion protection: zinc galvanization.
This process has to be done before magnetization. The size of the ring and
the sphercone have to match the measures given in this page after the
galvanization, which has to be of 1.35 mm. At the end of the process the sphercone should weight 2.106 gr. ·
Magnetization has to be performed after 72
hours the protection from corrosion has been completed: its application
generates mutability: for 72 hours the components can’t be touched or moved. Have to rest still, placed as close as possible to the Planet
surface, on top of organic field: a leaf, and then magnetized on it without
being ever moved. The spherecone has to be placed with the cone on the ground and the half
sphere up straight (inside a wood support). ·
The magnetization has to be performed for both of them in the same /day,
in the very end of the Planet field H, for the
ring and very end of L, for the sphercone. What shown in the drawing it’s the condition that makes the mechanism
working: the sphercone, when placed in the centre of the ring’s circular magnetic
field, must perfectly fit inside its upturned conical area. Without it there
is no need to assemble the mechanism: will seem to be suspended in the air.
That creates a natural path during vertical repulsion. |
|
Assembling process: |
|
|
Cross section |
The rings have to be leveled and aligned at
their centre, matching the distances given in this page. How to assemble the holding structure: ·
has to be made of organic element: wood, using as little magnitude of it
as possible, in mono wideness: 5.4 mm.
·
No light can get inside the mechanism. Light bulb placed on the border,
not the center. ·
Has to be located on the ground (bare Planet surface) and not moved. ·
Has to be made operative in L, end of it,
intended as the Pfield ANP in which dropping the sphercone in its first free
fall and Planet CW motion of pressure. ·
Has to be used as little wiring as possible. Just the minimum necessary. ·
No weight on top of the rings (all of them). A modification of any of the given values:
volumes, shapes, magnetic strength, and building/assembling indications bring
asymmetry into the mechanism preventing it to work. |
|
|
|
|
|
|
|
|
|
Vertical repulsion:
With light getting
in, the mechanism produces a force of repulsion which makes the sphercone
covering vertical displacement of 12.5 mm.
Closing the holding structure preventing light to get
in it produces gaining of magnetic strength. The rationalizing property will
unify it with the higher PRV mechanically gained getting magnetized on the bare
Planet surface: lower sublevel/higher PRV, then depressurized in MDD with the
Planets levels while getting lifted up, donating the mechanism the capability
of force of repulsion of 13.5 mm.
The Sphercone absorbs/realign its falling by
the side into its BDD with the rings in ascendant and descendant phase.
Both 8th level absorbing magnetic
stress produce SV3 inside their mfields: will be called star dust:
SD.
The property
of the SD which makes them absorbing each m/w as direction of motion: they get
generated by the field structure/mfields with their mechanical
contractions/expansions,
makes it
moving inside the sphercone structure.
1) magnetic
repulsion.
inside the 8th
levels produces both CW/ACW value of pressure / m/w: the first volumetric SU
produces SD, them the different volumetric expression simultaneously produces:
ACW
rotation/contraction: area of impact to absorb its pressure.
CW
rotation/expansion: the rest of the volume, suctions the SD structurally
contracted.
2) acceleration
(a): generates m/w which directs the SD in opposite direction:
·
Ascendant a produces downward m/w.
·
Descendant a produces upward m/w.
3) Planet PRV:
the 8th level simultaneously absorbs each value in ascendant /
descendant acceleration:
§ Ascendant: absorbing the Planet PRV its mfields rotates
CW producing:
CW expanding
pressure (prevailing pressure), simultaneously manifesting as outward pressure:
upward m/w in the upper half / downward m/w
in the lower half.
ACW m/w
e/c: its value is 9/10 CW pressure,
doesn’t stop the CW pressure, acting over the SD prevents its units to get out
the field:
§ Descendant: absorbing the Planet PRV its mfields rotates
ACW producing:
ACW
contracting pressure (prevailing pressure), simultaneously manifesting as:
downward m/w in the upper half / upward
m/w in the lower half.
CW m/w
e/c: its value is 9/10 ACW pressure,
doesn’t stop the ACW pressure, acting over the SD prevents its units to
collide/dissolve during the structural contraction.
4) BDD:
Sphercone/ring’s.
BDD is not
global as MDD, it’s between halves / between the first level of mfield.
Their
operative motion prevents their getting through: the 8th level is
taken from the LR not from the LP.
The magnitude
of mfields, inside the memory of motion, to take from it gets simultaneously
generated within the creation of a new DF: its h/p.
Gets
operated only in the area of contact only at the mfield level, not by the whole
structure, because of it doesn’t interfere with its motion:
crossing
each other 1th level produces the simultaneous transfer of memory of PRV as
proportional m/w inside their e/c. To generate this memory of PRV gets used the
lowest value of volumetric SU: CW or ACW.
Structurally
the transfer/absorbing of PRV is between 1th levels, as memory of PRV absorbed
inside their memory departments, consequently doesn’t get transferred to the
2/7th.
BDD gets
operated simultaneously with MDD. Their motion is similar as magnitude of PRV
absorbed:
MDD, as the
simultaneous absorbing of the Planet PRV is not a gradual motion, but operated
unit by unit, the whole magnitude of it:
it’s the
factor which produces the additional side motion during the free fall
(ascendant/descendant).
BDD as the
simultaneous absorbing of any other field PRV is not a gradual motion, but
operated unit by unit, the whole magnitude of it.
but differs
as direction:
MDD: the
absorbed PRV gets transferred to the 2/7th level.
BDD: the
absorbed PRV gets transferred to the 1th level.
To prevent
unification and installing of memory of motion, the balancing mechanism (1th
level) makes the two motions being operated simultaneously inside different
volumetric magnitudes:
MDD: main
align, the whole volume with own direction of motion.
BDD:
secondarily align, the area of contact using the lowest volumetric magnitude of
SU with own direction of motion.
The
sphercone to memorize high PRV always uses ACW SU always with the same value:
always performs BDD with same ring PRV.
Generates
the contracting pressure which absorbed by the SD located inside its mfields’
e/c, breaks their spherical structure in flux of spherical units.
The rings to
memorize low PRV always uses CW SU always with the same value: always performs
BDD with sphercone PRV.
Generates
the s/pressure which suctions/directs the SD from the sphercone mfields inside
the e/c of its mfields/units.
suctioning
process: the suctioning of SD is a simultaneous process. The SD subtle/smaller
nature simultaneously absorbs any time/direction of motion of any m/w /
pressure gets in contact with: the smaller the volume, the faster. It’s a liner process: the SD next to the mfields
which generate s/pressure move in it
generating two conditions:
·
empty the place where they were located,
·
generate s/pressure in it.
the magnitude of SD located next to it absorbs the generated
s/pressure and moves in it, generating s/pressure in the place where it was
located.
This process generates a chain reaction which every time moves the
whole magnitude of SD generating the following condition:
·
the following magnitude of SD moving
frontally generates a push up m/w which direct the magnitude of SD further.
·
generates a chain reaction in which the front
magnitude of SD getting pushed ahead filling the expelling area, increasing its
density in it.
this process
stops when the expelling area gets completely filled up. The impossibility of
moving further ahead because of structural pressure, generates a backward m/w
which gets absorbed line by line stopping their frontal motion.
5) Structural
realign after the BDD:
after each
BDD simultaneously with loss of contact between 1th levels, gets operated the
realign of own PRV:
while the
process of absorbing of PRV, crossing each other 1th level, it’s simultaneous
the realign is mechanical differing in two conditions:
·
Gets absorbed linearly: in the area of contact intended as the
first line of mfields: from the 8th level top end to the last next
to the 7th level.
·
Gets absorbed as area: gets abandoned the linearity of the simultaneous
process and adopted mechanical process which reverse the absorbed SU of
rotation, using its own PRV, always with same value.
The
prevention of the installing of a memory produces the mechanical motion. Its
m/w do not interferes with MDD:
·
Value. BDD being generated locally not spherically produces a
fragments of SU m/w.
·
Direction: being directed only toward the 1th level, do not
adds/retains value to the MDD m/w.
BDD, being
operated always with the same PRV using always the lowest magnitude of SU,
generates four fix values of pressure:
ascendant
MDD produces: SV/+v (leaves the fields own PRV unchanged) /
descendant MDD produces: SV/-v (leaves the fields own PRV
unchanged)
Their
realign is independent and mechanically operated. Simultaneously with loss of
contact the area undergone BDD, freely liberates the absorbed PRV with reverse
rotation, simultaneously expelling / suctioning SD.
sphercone:
CW SU, produces the s/pressure which direct the SD inside the mfields which
have operated BDD:
The SD gets
simultaneously suctioned inside the mfields which operated BDD.
rings: ACW
SU, produces the contracting pressure which:
·
breaks its sphericality in flux of spherical units:
·
directs the SD backward from the inner side into the outer side.
The SD
up/down motion, as whole volumetric magnitude, through the ring’s halves:
equatorial plane, always generates a residue of it in between them.
Absorbing
the contraction m/w moves backward and generates s/pressure all the way long,
from the area it was located till the
back end: getting simultaneously absorbed by the SD next to it (located inside
the mfield of the two halves), makes it flowing in it; empty space between
areas, with it; in the same direction: back end.
Their motion
out of the mfields e/c generates as well s/pressure which simultaneously
absorbed by the SD next to it makes it flowing in it. This mechanism produces a
chain reaction of s/pressure which simultaneously direct the whole magnitude of
SD inside the empty space between halves and from there to the outer end of the
8th level.
These
factors act upon the sphercone in free fall:
1) Direction of
the Planet motion of pressure. CW / ACW.
2) Planet ANP:
the
mechanism gets started in Planet L. Then, the sphercone
at each BDD change area to communicate: L / H / H / L. Within the Planetary time/unit of one motion
of pressure, can’t be produced two following communication with the same area.
They have different PRV: H: highest value / H: 9/10 of H / L: 9/10 of H / L: lowest value 9/10 of
H/H and 8/10 of H.
3) Planet PRV:
(same as SD 3)
MDD:
simultaneously absorbed in the 8th level.
During the
ascendant/descendant acceleration, its 8th level, every time getting
through a different PRV, simultaneously adjusts/absorbs it:
Ascendant
acceleration: absorbs Planet PRV with CW direction.
Descendant
acceleration: absorbs Planet PRV with ACW direction.
The Planet
PRV, from the 8th level gets gradually transferred to the 2/7th
levels using the SU.
Secondary realign: inside the
field structure is operative permanent direction of realign.
4) Direction of
the permanent realign own PRV from permanent magnetization.
MDD: during
the ascendant/descendant acceleration the (2/7th) internal levels
keep operating their permanent realign from permanent magnetization using the
SU with ACW rotation.
Gets used
the lowest value of SU. The
pressurizing modification of the 2/7 level gets mechanically transferred to the
8th level.
Primary realign: variation
of PRV operated over the field structure, here permanent magnetization, get
permanent status of realigning: till gets reestablished own PRV.
This
direction of motion get on top of each other, its operative value kept
constant, all time long. Main value.
Property:
5) Rationalizing
property: makes two/multiple motion of same nature/direction combining in one.
The
unification of the pressure acting over the sphercone, have the property of
modifying the magnitude of SU which realign the PRV of the 2/7th
level, directly affecting the Planet motion of pressure: gets simultaneously
balanced modifying the sphercone acceleration.
Mono
direction of pressure: clear predominance of PRV unified, decreases the magnitude
of SU, decelerating: to equilibrate the spherecone gets accelerated.
Bi direction
of pressure: not predominance of PRV unified, increase the magnitude of SU,
accelerating: to equilibrate the spherecone gets decelerated.
The acting pressures being all structural:
not variation of pressure as nature direction, produces SU of modification of
acceleration:
Directed
toward the 2/7th levels: because their realigning motion uses the
lowest magnitude of SU, gets directly influenced by it, as above described.
Directed
toward the SD: the SU acceleration/deceleration of the sphercone state of
acceleration do not have any direct consequence over the motion of the SD.
Mechanical
unification of direction of pressure inside the sphercone halves: after the
BDD, simultaneously to the end of the structural CW realign, the a m/w
mechanically unifies with the same direction of the pressure active inside the
sphercone structure, increasing its value. The SD located inside the two halves
simultaneously absorbs the pressure from both halves: the unification
increasing the value of the structural pressure of one half operates unequally
over it making the h/p aware of it and simultaneously:
o balances the
structural value of pressure, generalizing it with proportional increase in the
other half, constantly all time long.
o blocks the
SD inside the equal value of the structural pressure of the two halves till
following BDD.
The value of
pressure generated with the unification of pressures, gets simultaneously
detected while acting over the SD: its value moves it (SD) in the same
direction empting half of the expelling area: 1/4 of unit, decreasing the
magnitude in it, transforming High magnitude in Low.
To produce
the motion of the volumetric magnitude of SD produces is need proportional
value of pressure. Above it, the simultaneous increase of pressure in the other
half getting always operated with proportional value, makes the SD moving the
same distance: Ľ of unit with any balancing motion, no matter their value
pressure.
Perpetual energy from magnetism:
SD cycle. (after the assembling process / the writing/pictures
describe motion in Planetary CW motion of pressure)
The factors
influencing the SD/sphercone vertical motion, may get unified and used to
produce continuous flux of SD toward the light bulb.
The main
conditions to get Maha/unification which keeps the light bulb all time long on,
are the Planet ANP / direction of pressure, in which the mechanism gets
started:
ANP: L / direction of the motion of pressure: CW
The
sphercone falling inside the center of the ring makes their 8th
level impacting, simultaneously producing:
a) value of
pressure / SV3: SD, in all their mfields (4).
It’s simultaneous to impact: being an
independent mechanical motion, not a motion of pressure, within the volumetric
SU while rotating ACW/CW produces proportional m/w inside the e/c of all the
mfields, manifesting as level of SV: SD.
(all the
drawings pretends just to give an idea of it, nothing more.)
the
sphercone fall fall/impact keeping producing value of pressure till reaches
acceleration 0.
Increasing
the volumetric SU produces the deformation of the original volumetric form: the
holding pressure (h/p) which keeps its spherical units unified inside the field
structure, absorbs the stress with its mfields mechanically, modifying their
volume: ACW rotation, which contracts them in the area of the impact, CW
rotation which expands the others in the rest of the volume:
Sphercone:
falls inside the conical volume of its 8th level and inside the ring
empty center (5).
Ring: its 8th level gets pushed down and
its empty center enlarged (down/outward pressure, 5).
their
mfields while rotating ACW structurally contract the SD, breaking their
sphericality (h/p) in spherical units.
their
mfields while rotating CW suction the whole magnitude of SD, inside their e/c.
In both magnets, the ACW/CW modification of
the volume of their mfields are produced with the h/p, which keeps/stores its
value in them.
Ascendant acceleration: 0
acceleration-repulsion / first ring:
Due to:
a) the property
of SD which makes it simultaneously absorbing the time/direction of the m/w
gets in contact with,
b) direction of
the pressure: ACW area of impact, CW in the rest of their volume,
c) magnetic
strength of the stationary ring, four times higher than sphercone,
when the
sphercone reaches 0 acceleration, the absence of pressure over their h/p,
produced reverse rotational motion making operative the volumetric realign of
their mfields/structure:
·
ACW rotation, in the mfields previously stressed CW: simultaneous
SU of volumetric realigning motion,
simultaneously
contract the magnitude of SD located inside their e/c.
·
CW rotation in the mfields previously stressed ACW: simultaneous
SU of volumetric realigning motion,
simultaneously
suction the whole SD, inside their e/c.
The rest of
the volume remains blocked because of active stress over the mfields:
·
Sphercone 8th level: 2/7th level on top of
its mfields.
·
Ring 8th level: sphercone on top of its mfields.
*the outer magnitude of SD gets contracted
inside the wood structure: the impact breaks their spherical structure. Not
regenerating the level of SV, the
spheres dissolve.
The value of
pressure over the sphercone/ring 8th levels conditions the motion of
the SD inside their field structures during the structural realign:
Sphercone:
Its realign is upward.
Technically
the realign gets operated building up pressure till overcoming the one which
block their motion
The
sphercone 8th level with lower volumetric value completes the
realign of its mfields, before the ring: producing the following conditions:
o
Upward motion of the 2/7 level (sphercone):
the full CW
expansion of the mfields of the lower half produces reversed motion: makes the
sphercone moving upward.
o
Simultaneous suctioning of the whole magnitude of the ring SD:
first SU of volumetric expansion
The
sphercone is located on top of the ring with minimum distance due to downward
pressure/opposite nature of the halves.
Operating
the CW realign of its lower half, while the ring 8th level remains
blocked by the value of its weight pressure on it, produces value of s/pressure
which reaching out gets through the ring structure: 8th level, and
simultaneously suctions the whole magnitude of SD located inside its mfields.
Inside the
sphercone structure, the lower half moving up produces an upward m/w in between
the two halves: impacting the half in front of it produces SU of ACW
contraction. Simultaneously balanced with CW rotation produces s/pressure.
Unifying with the one already operative produces continuity of flow, directing
inside its mfields the SD coming from
the ring. The SD vertical motion trough the two expelling areas, as whole volume,
produces/leaves magnitude of it inside the empty space between areas at the
equatorial plane.
o
While operating the structural realign simultaneous absorbs of the
Planet PRV: MDD*.
Ring: its
realign is upward.
Its 8th
level, after having generated/build up pressure needed to overcome the one produced
by the sphercone weight on top of it, which was blocking the CW expansion of
its mfields, completes its volumetric realign producing the following
simultaneous conditions:
o
Upward motion:
The full CW expansion of its mfields produces
reversed motion: makes the structure producing up/inward motion: while rising
its central area up reduces the empty space in it, producing proportional
upward value of pressure.
o
Sphercone upward acceleration:
Still on top of the ring completely absorbs
the upward pressure. Its low volumetric/weight value makes it accelerating
upward, produces the following simultaneous condition:
o
8th level: simultaneous absorbing of the Planet PRV:
MDD*,
This process
makes its structure/mfields expanding CW, producing s/pressure inside their
e/c. Both of them act upon the SD: the CW pressure of expansion is prevalent.
The
s/pressure being 9/10 of it produces the condition which: do not stop the SD
outward motion, just slows it prevents it to get out of the mfields / empty
area between halves.
o
SD: simultaneous absorbing of the pressure ratio between halves:
first unit of volumetric expansion.
Inside the
upper half takes place the mechanical unification of the downward pressures: a
m/w /
s/pressure.
The SD located
inside the two halves simultaneously absorbs the pressure from both halves: the
unification increasing the value of the structural pressure of one half
operates unequally over it making the h/p aware of it and simultaneously:
o
balances the structural value of pressure, generalizing it with
proportional increase in the other half, constantly all time long.
o
blocks the SD inside the equal value of the structural pressure of
the two halves till 1th BDD.
The value of
pressure generated with the unification of pressures, has been simultaneously
detected while acting over the SD, within one unit of volumetric expansion /
within one unit above 0 of acceleration: its lowest value do not causes any
motion to the whole magnitude of SD, leaving it in the same position.
o
s/pressure inside its mfields.
Generally the s/pressure prevents SV to get
out of the field structure:
the sphercone structural s/pressure, made
operative with MDD, directly acting toward the SD d/v produces value of
pressure which prevails the one generated by the ring.
UPWARD ACCELERATION:
1th BDD sphercone / first ring:
|
Sequence of motion, 0 acceleration / BDD.
* inside the sphercone the whole magnitudes
of SD completely fills up the expelling area three times: expelling the whole
magnitude of SD which fills up the expelling area generates high magnitude of
SD. ** The ACW motion of pressure of the Planet
field gets in/out of the sphercone sequence H /
H / L / L . Its time of permanence inside the sphercone
vertical motion corresponds to one communication/area.
Generating increase of ACW pressure gains
the property of modifying the
rate of the sphercone acceleration. The value of variation is SU: it’s a balancing process which doesn’t
influence the motion of SD inside the sphercone (above paragraph: factors acting upon the
sphercone in free fall: N° 5) The
sphercone upward acceleration makes it reaching the first ring. Its mfield
getting through the ring’s establish simultaneous BDD manifesting as: a) the
sphercone’s mfields contracts ACW: low PRV adjusting higher, b) the ring
mfields expands CW: high PRV adjusting lower. |
|||||||||||||||||||||||||
|
BDD gets
operated only in the area of contact: crossing of each other 1th level
produces the simultaneous transfer of memory of PRV as proportional m/w
inside their e/c. Structurally the
transfer/absorbing of PRV is between 1th levels, as memory of PRV absorbed
inside their memory departments, consequently doesn’t get transferred to the
2/7th. To become a
memorized PRV gets reproduced its value of pressure inside their e/c using
lowest value of volumetric SU: CW or ACW. It’s a mechanical motion which
linearly gets absorbed by the whole magnitude of mfields located at the back
of the ones operating BDD, till reaching the last next to the 7th
level. The BDD is simultaneously performed by sphercone/ring’s mfield,
linearly: simultaneously, the sphercone mfields contract ACW and the ring
expands CW suctioning the whole magnitude of SD: then, complete separation
produces the reversion of the rotation of the BDD to reestablishing of own
PRV: the sphercone expands CW, the ring contract ACW. |
|||||||||||||||||||||||||
|
Detail BDD:
|
Simultaneously
with contact/crossing of each other 1th level, gets established BDD: the sphercone contracting its mfields
breacks the h/p of the SD located inside their e/c, transforming them in flux
of spherical units. the ring expanding its mfields suctions the
whole magnitude of SD inside their and their units e/c and axis. |
||||||||||||||||||||||||
|
|
When the area of the ring upper half
establishes BDD, finds no SD inside the Sphercone’s mfields: its equal value of s/pressure
simultaneously transfers/suctions half magnitude of the SD located inside the
mfields of the lower half upward inside its mfields. *The SD vertical motion trough the two
expelling areas, as whole volume, produces/leaves magnitude of it inside the
empty space between areas at the equatorial plane. |
||||||||||||||||||||||||
|
|
The process of transferring half magnitude
of SD upward gets kept on all time long, maintaining equal the density of SD
inside the mfields of both halves. |
||||||||||||||||||||||||
|
The upward
acceleration makes the interaction between 8th levels lasting just
the time needed to produce BDD. As soon as
their mfields separate, the areas undergone BDD simultaneously align the
absorbed PRV to their own PRV with reverse rotational motion: |
|||||||||||||||||||||||||
|
|
a) The
sphercone mfields simultaneously expand CW: generate the m/w which causes
proportional suction of SD circularly located inside the mfields of the lower
half, simultaneously moving it upward/transferring it inside the mfields of
the expelling area. The SD vertical motion trough the two expelling areas, as whole
volume*, produces/leaves magnitude of it inside the empty space between areas
at the equatorial plane. b) The ring
mfields simultaneously contract ACW: the
magnitude of SD located in the empty space between halves at the equatorial
plane, absorbing the ACW pressure gets directed backward: its
flowing away generates empty space and s/pressure in it. simultaneously
absorbed by the SD next to it, makes it flowing in it: empty space between
areas, and with it in the same direction: back end, generating as well
s/pressure inside their e/c which simultaneously absorbed by the SD next to
it makes it flowing in it. *This
mechanism produces a chain reaction of s/pressure which simultaneously direct
the whole magnitude of SD inside the outer end of the 8th level. |
||||||||||||||||||||||||
|
|
In the
ring’s outer side is located the wire, which being soldered to it has become
its extension, mechanically working as flowing gate. When the SD circularly expanding
reaches the e/s between its halves, flows in it, breaking its circularity in
two halves: its smaller height slows the flowing inside it making the SD
compacting next to it. Its compacting forms a circular unit, which keeps
moving through the wire’s e/s, till reaching its opposite end: light bulb,
turning it on (the SD gets out of the last of its components). (The SD
has been drawing in spots to facilitate the graphical description of how gets
generated a circular unit. The
drawing pretend to give an idea of it, only. 8th levels out of
proportion to produce visible SD motion.) |
||||||||||||||||||||||||
UPWARD ACCELERATION:
4.05 mm vertical displacement
between 1th / 2th ring:
|
The
volumetric reduction of SD proportionally decreases the value of the
structural s/pressure in both halves (from structural CW expansion, due
information). |
||||||||||
|
|
Upper
half: after the BDD, simultaneously with the end of the structural CW realign
the downward direction of the a m/w mechanically unifies with the downward
direction of the s/pressure active inside the sphercone structure, increasing
its value. The SD
located inside the field structure simultaneously absorbs the pressure from
both halves: the unification increasing the value of the structural pressure
of one half operates unequally over it making the h/p aware of it and
simultaneously: o balances
it with proportional increase of pressure in the other half, constantly all
time long. o blocks the
SD inside the equal value of the structural pressure of the two halves till
next BDD. The value
of pressure generated with the unification of pressures, has been
simultaneously detected while acting over the SD, within one unit of
volumetric expansion. Its value moved it (SD) in the same direction empting
half of the upper expelling area: 1/4 of unit, decreasing the magnitude in
it, transforming High magnitude in Low. |
|||||||||
UPWARD ACCELERATION:
2th BDD: sphercone/second ring:
|
H-: Low magnitude if compared to H. high magnitude if compared to L. The
sphercone upward acceleration makes it reaching the second ring. Its mfield getting
through the ring’s establish simultaneous BDD manifesting as: a) the
sphercone’s mfields contracts ACW: low PRV adjusting higher, b) the ring
mfields expands CW: high PRV adjusting lower. |
||||||||||||||||||||||||||
|
|
The
absence of SD, makes the BDD in the first half of the expelling area of the
upper half producing exchange of PRV, only. Reaching
the second half begins the motion of the SD, following the same patter as in
the first BDD: the sphercone contracting its mfields
breacks the h/p of the SD located inside their e/c, transforming them in flux
of spherical units. the ring expanding its mfields suctions the
whole magnitude of SD inside their and their units e/c and axis. Then the equal value of s/pressure
expressed by the mfields of the upper half, simultaneously transfers/suctions
half magnitude of the SD located inside the mfields of the lower half upward
inside them. The SD vertical motion trough the two
expelling areas, as whole volume, produces/leaves magnitude of it inside the
empty space between halves at the equatorial plane. |
|||||||||||||||||||||||||
|
|
The process of transferring half magnitude
of SD upward gets kept on all time long, maintaining equal the density of SD inside
the mfields of both halves. |
|||||||||||||||||||||||||
|
The upward
acceleration makes the interaction between 8th levels lasting just
the time needed to produce BDD. As soon as
their mfields separate, the areas undergone BDD simultaneously align the
absorbed PRV to their own PRV with reverse rotational motion: |
||||||||||||||||||||||||||
|
|
a) The
sphercone mfields simultaneously expand CW: generate the m/w which causes
proportional suction of SD circularly located inside the mfields of the lower
half, simultaneously moving it upward/transferring it inside the mfields of
the expelling area. The SD vertical motion trough the two expelling areas, as whole
volume, produces/leaves magnitude of it inside the empty space between areas
at the equatorial plane b) The ring
mfields simultaneously contract ACW: the
magnitude of SD located in the empty space between areas at the equatorial
plane, absorbing the ACW pressure gets directed backward: its
flowing away generates empty space and s/pressure in it. Simultaneously
absorbed by the magnitude of SD getting contracted inside the mfields e/c,
produces its flowing, first in the empty space between halves, then in the
same direction: the outer side. Reaching
the wire, gets all the way through it till reaches the light bulb, keeping it
on. |
|||||||||||||||||||||||||
UPWARD ACCELEATION:
4.05 mm vertical displacement
between 2th ring / 0 acceleration:
|
The
volumetric reduction of SD inside the sphercone structure proportionally
decreases the value of the structural s/pressure (from structural CW
expansion, due information). |
||||||||||
|
|
Upper
half: after the BDD, simultaneously with the end of the structural CW realign
the downward direction of the a m/w mechanically unifies with the downward direction
of the s/pressure active inside the sphercone structure, increasing its
value. The SD
located inside the field structure simultaneously absorbs the pressure from
both halves: the unification increasing the value of the structural pressure
of one half operates unequally over it making the h/p aware of it and
simultaneously: o balances
it with proportional increase of pressure in the other half, constantly all
time long. o blocks the
SD inside the equal value of the structural pressure of the two halves till
next BDD. The value
of pressure generated with the unification of pressures, has been
simultaneously detected while acting over the SD, within one unit of
volumetric expansion. Its value
moved it (SD) in the same direction empting half of the upper expelling area:
1/4 of unit, decreasing the magnitude in it, transforming High magnitude in
Low: makes L being equal to H as magnitude of SD expelled The
simultaneous increase of pressure in the other half getting always operated with
proportional value, makes the SD moving the same distance: Ľ of unit, with
any other balancing motion, no matter their value pressure (intended as the
ones which can produce the motion of the SD, not above it). Reaching 0
acceleration produces the dissolving of the a m/w. |
|||||||||
DOWNWARD ACCELERATION:
4.05 mm vertical displacement
between 0 acceleration / 2th ring :
free fall
|
Reaching 0
acceleation it’s the point in which two directions of motion gets changed: o direction
of the motion/acceleration, downward: the a m/w gets active in the lower half
of the sphercone mechanically unifies its upward direction with structural
upward pressure. o direction
of the structural pressure: the downward align to the Planet PRV gets
produced with: ACW rotation, producing structural pressure in that direction
and CW m/w inside the e/c: 9/10 of the
ACW pressure. |
|
|
|
Lower
half: simultaneously with the beginning of the downward acceleration, the
upward direction of the a m/w mechanically unifies with the direction of the
ACW pressure active inside the sphercone structure, increasing its value. The SD
located inside the two halves simultaneously absorbs the pressure from both
halves: the unification increasing the value of the structural pressure of
the upper half operates over it unequally making the
h/p aware of it and simultaneously: o balances
the structural value of pressure, generalizing it with proportional increase
in the other half, constantly all time long.
o blocks the
SD inside the equal value of the structural pressure of the two halves till
following BDD. The value
of pressure generated with the unification of upward pressures, has been
simultaneously detected while acting over the SD within 1 volumetric unit of
ACW contraction / 1 unit above acceleration 0: its lowest
value of pressure doesn’t have the strength to moving it, leaving it in the
same position. |
DOWNWARD ACCELERATION:
3th BDD: sphercone/ 2th ring:
|
The
sphercone downward acceleration makes it reaching the second ring: Its mfield
getting through the ring’s establish simultaneous BDD manifesting as: a) the
sphercone’s mfields contracts ACW: low PRV adjusting higher, b) the ring
mfields expands CW: high PRV adjusting lower. |
|||||||||||||||||||||||||
|
|
Simultaneously
with contact/crossing of each other 1th level, gets established BDD: the sphercone contracting its mfields
breacks the h/p of the SD located inside their e/c, transforming it in flux
of spherical units. the ring expanding its mfields suctions the
whole magnitude of SD inside their and their units e/c and axis. When the area of the ring lower half
establishes BDD, finds no SD inside the Sphercone’s mfields: the equal value of s/pressure
simultaneously transfers/suctions half magnitude of the SD located inside the
mfields of the upper half downward inside its mfields. |
||||||||||||||||||||||||
|
|
The process of transferring half magnitude
of SD downward gets kept on all time long, maintaining equal the density of
SD inside the mfields of both halves. The SD vertical motion trough the two
expelling areas, as whole volume, produces/leaves magnitude of it inside the
empty space between areas at the equatorial plane. |
||||||||||||||||||||||||
|
The
downward acceleration makes the interaction between 8th levels
lasting just the time needed to produce BDD. As soon as their mfields separate, the
areas undergone BDD simultaneously align the absorbed PRV to their own PRV
with reverse rotational motion: |
|||||||||||||||||||||||||
|
|
a) The
sphercone mfields simultaneously expand CW: generate the m/w which causes
proportional suction of SD circularly located inside the mfields of the lower
half, simultaneously moving it upward/transferring it inside the mfields of
the expelling area. the
magnitude of ˝ unit gets equally distributed inside the expelling area of
both halves: compared to the previous realign gets decreased the SD density
in them. The SD vertical motion trough the two
expelling areas, as whole volume, produces/leaves magnitude of it inside the
empty space between areas at the equatorial plane. b) The ring
mfields simultaneously contract ACW: the
magnitude of SD located in the empty space between areas at the equatorial
plane, absorbing the ACW pressure gets directed backward: its
flowing away generates empty space and s/pressure in it. Simultaneously
absorbed by the magnitude of SD getting contracted inside the mfields e/c,
produces its flowing, first in the empty space between halves, then in the
same direction: the outer side. Reaching
the wire, gets all the way through it till reaches the light bulb, keeping it
on. |
||||||||||||||||||||||||
DOWNWARD ACCELERATION:
4.05 mm vertical displacement
between 2th / 1th ring:
|
|
||||||||||
|
|
Lower
half: after the BDD, simultaneously with the end of the structural CW realign
the upward direction of the a m/w mechanically unifies with the upward direction
of the ACW pressure active inside the sphercone structure, increasing its
value. The SD
located inside the field structure simultaneously absorbs the pressure from
both halves: the unification increasing the value of the structural pressure
of one half operates unequally over it making the h/p aware of it and
simultaneously: o balances
it with proportional increase of pressure in the other half, constantly all
time long. o blocks the
SD inside the equal value of the structural pressure of the two halves till
next BDD. The value
of pressure generated with the unification of pressures, has been
simultaneously detected while acting over the SD, within one unit of
volumetric expansion. Its value moved it (SD) in the same direction empting
half of the lower expelling area: 1/4 of unit: its low density didn’t have
the strength to get through the ACW pressure of the upper half. Its upward
motion increased the density to ordinary, inside the upper half of the lower
expelling area. *lowest magnitude: the magnitude
of SD could completely fill 3 times the expelling area of both halves. Having
expelled 2.5 units: 1th BDD: 1
unit / 2/3th BDD: 3/4 of unit, remains
only half unit inside the sphercone. Getting completely suctioned produces
lowest magnitude SD in the expelling area, |
|||||||||
DOWNWARD ACCELERATION:
4th BDD: sphercone/
1th ring:
|
The
sphercone downward acceleration makes it reaching the second ring: Its mfield
getting through the ring’s establish simultaneous BDD manifesting as: a) the
sphercone’s mfields contracts ACW: low PRV adjusting higher, b) the ring
mfields expands CW: high PRV adjusting lower. |
|||||||||||||||||||||||||
|
|
The
absence of SD, makes the BDD in the first half of the expelling area of the
lower half producing exchange of PRV, only. Reaching
the second half begins the motion of the SD, following the same pattern as in
the previous BDD: the sphercone contracting its mfields
breaks the h/p of the SD located inside their e/c, transforming it in flux of
spherical units.. the ring expanding its mfields suctions the
whole magnitude of SD inside their and their units e/c and axis. When the area of the ring lower half
establishes BDD, finds no SD inside the Sphercone’s mfields: its equal value of s/pressure
simultaneously transfers/suctions half magnitude of the SD located inside the
mfields of the upper half downward inside its mfields. |
||||||||||||||||||||||||
|
|
The process of transferring half magnitude
of SD downward gets kept on all time long, maintaining equal the density of
SD inside the mfields of both halves. The SD vertical motion trough the two
expelling areas, as whole volume, produces/leaves magnitude of it inside the
empty space between areas at the equatorial plane. |
||||||||||||||||||||||||
|
The downward
acceleration makes the interaction between 8th levels lasting just
the time needed to produce BDD. As soon as their mfields separate, the
areas undergone BDD simultaneously align the absorbed PRV to their own PRV
with reverse rotational motion: |
|||||||||||||||||||||||||
|
|
a) The sphercone mfields simultaneously expand
CW: The
absence of SD inside its field structure makes the generated s/pressure
acting over nothing. b) The ring
mfields simultaneously contract ACW: the
magnitude of SD located in the empty space between areas at the equatorial
plane, absorbing the ACW pressure gets directed backward: its
flowing away generates empty space and s/pressure in it. Simultaneously
absorbed by the magnitude of SD getting contracted inside the mfields e/c,
produces its flowing, first in the empty space between halves then in the
same direction: the outer side. Reaching
the wire, gets all the way through it till reaches the light bulb, keeping it
on. |
||||||||||||||||||||||||
Starting in L, as the Planet ANP and CW
direction of the motion of pressure, are the primarily conditions which
generates a constant storing of magnitude of SD in the light bulb’s components.
The first BDD in H, with expulsion of High
magnitude of SD, makes possible to have flux of SD getting constantly expelled
out / light bulb on, always covered by magnitude/flux of SD in, in the ascendant and descendant path, making
possible to keep it on all time long.
Side experiments:
·
Loss of magnetic strength:
1) The
experiment is about making a wood support by the side and placing on top of it
a field/element.
It will have
MDD of pressure with the magnet’s 8th level. It may be used to check
out its dialogue with different PRV.
2) Each field
decreases its PRV with height.
The experiment
is about making wood support under the mechanism: very, very subtle. Every
following time has to be increased its height, till reaching the limit.